Assembling this fantastic Kiddies Play Desk does not require a lot of wood and other materials and can be done in a relative short period of time. For step-by-step instructions on how to create this kiddies play desk, follow our DIY instructions below.

Watch the video: https://www.youtube.com/watch?v=3o6reymVOLU

The post How To Make A Kids Play Desk appeared first on Alcolin.

Well, we have the Simple Solution just for you! Why not give the old bench a new lease on life, while also ensuring it fits in perfectly with the new look of your bedroom.

For this project, you will need Alcolin Contact Adhesive and a free afternoon over the weekend.

The post Upholster Your Old Bedside Bench appeared first on Alcolin.

Well, we have the Simple Solution just for you. You can build your very own umbrella box-cum-table in no time and be able to cart the box from one side of the pool to the other without breaking a sweat!

What’s best is that the box can double as a side table for your refreshments and favourite book too!

We used Alcolin Ultra Wood Glue for this project because it is hard wearing and waterproof – so it can be used outside without weakening the bond strength.

The post Umbrella Box on Wheels appeared first on Alcolin.

Start out by measuring the space you have available – if you’re placing it above a TV like we did, then make sure this will be significantly wider (provided you have the space) – and adjust as necessary. We split one 3m plank neatly into three pieces, but you may need more. Most timber planks come in 1.8m, 2.4m or 3m lengths so find something that works with those to maximise your budget.

Once you’ve planned and made all of the purchases, sand the wood to a smooth finish, but be mindful of the edges that will be glued together as you don’t want to make those into corners. If you are a perfectionist and have done this, it can always be fixed with a little bit of Alcolin Woodfiller afterwards. Be sure to get rid of all loose sawdust and the like before gluing, as this will negatively affect the final bond strength.

Measure and mark out the glue lines and drill holes as shown in the video, then glue the back piece to the bottom, and that to the front. Clamp and clean up the excess glue using a damp cloth. (It is always handy to keep a damp cloth on hand while gluing and cleaning as you go, as this makes it much cleaner.)

Fill any holes or gaps with Alcolin Woodfiller, using a tiny bit extra and sanding the excess once dry to have a perfectly smooth finish. Once the glue is dry, remove the clamps and finish the shelf off with your choice of wood primer and paint, then secure to the wall and arrange your pictures as neatly or as scattered as you desire!

The post DIY Picture Shelf appeared first on Alcolin.

Start by selecting the knives that will go on display, then arrange them together and measure how much space is required before purchasing the plywood – if you need a different size then adjust the 280mm measurment accordingly. Once you have the plywood cut to size, place the knives on the board (as you’d be displaying them) and mark the knifes’ blade positions; you’ll need to drill recesses for 2 magnets per knife. Cut the slots for the bracket stands and in the brack stands after boring the holes, and attach the magnets and stands using Alcolin Fix-All. Finish by sanding then decorating as desired.

The post Magnetic Knife Rack appeared first on Alcolin.

Start with the hardest part of the job, which really isn’t that tough: ensure the surface where you’ll be applying the adhesive is clean, dry and smooth. It may require some sanding, scrubbing or scratching to ensure it really is clean, then dry. Then apply a thin, even layer of Alcolin Hi Tack Carpet & Vinyl Adhesive to the flat surface and leave for around 30 minutes until the glue is slightly tacky (but not dry!). This will allow you to apply the covering more easily, and speed up the whole process.

Secondly, press the covering into the adhesive and roll out all of the air bubbles – just like when you’re putting a new screen protector onto your mobile phone. Get it perfectly rolled out, then leave this to dry for an hour and give it a final roll. The adhesive will be completely dry after 24 – 48 hours (longer in colder or humid climates), after which you can cut any excess material off with a Stanley knife.

Now you have a brand new table, fit for the finer things in life! We’d love to see what you’ve done and hear your tips and tricks. Let us know on Facebook or send us an email at marketing@alcolin.co.za.

The post Reborn Old Table appeared first on Alcolin.

Scratching posts are essentials for cats; not only do they stop them clawing all of your precious things, but its also vital for cats’ mental and physical health. Scratching allows cats to work most of the muscles and tendons from the top to the bottom of their body. Cats also marks their territory by scratching. The scent glands in your cat’s paws let them claim the space as theirs while they scratch, and the physical scratch marks leave a message for other cats, too. Being able to mark their territory will leave your cat more relaxed and confident, decreasing their scratching elsewhere in your house.

It is essential that your scartching post meets the following criteria for your cat to love it and use it permanently:

1. Make it tall: the cat needs to stand and scratch, so if 40cm is too short, then make it longer!
2. Make it strong: cats would scratch trees in the wild to mark their territory, so the post needs to be similarly strong… and not fall over when being scratched.
3. Make it nice: your cat will enjoy scratching it if it is made from material that is deep enough, isn’t sharp, and doesn’t completely shred in a few seconds. Sisal is a great material for this and widely available, even online.

Other than the directions in the guideline below, there aren’t any other tips or hints we can give you to make this project easier. Create this project simply with Alcolin Contact, PVC weld and Fix All in a few hours, and watch you cat enjoy!

The post Kitty Scratching Post appeared first on Alcolin.

Top tip: We suggest using Alcolin Pro Wood Glue for this project as it does not allow for any creep or flexibility once cured, so this little desk organiser will be able to withstand anything thrown at it!

Start this project by measuring out your desk space and ensuring the size is suitable – and if not then adjusting accordingly. Once you’re happy with the plans, cut the four dividers at a slight angle (we didn’t like a 45° angle so went with a 30° angle instead) and glue and screw to the back plank. Of course, the screws aren’t essential but hold the wood in place until the glue is dry – allowing you to finish the build faster.

Secure the bottom of the organiser to the first piece using the Pro Wood Glue and a few nails, then fill all of the nail holes with Alcolin Woodfiller (Pine would be the best colour for this, unless you are painting it afterwards). Once the Woodfiller is dry, sand the entire thing so that splinters won’t become a work hazard, and presto, a chic desk organiser that adds a personal touch to your office space.

The post Chic Desk Organiser appeared first on Alcolin.

There isn’t much to say about this project, and not many ways that you can go wrong, but here’s the best way we’ve found to do it:

1) Break the cap of the double-syringe and extrude equal amonts of Rapid Epoxy out. Mix them together until they have fully mixed – it should be one uniform colour. The glue works when the two parts form a chemical reaction and create a very strong bond, so if you haven’t mixed them properly, there is a chance that the glue may not dry completely and wil not form a strong bond.

2) Glue the two bowls to each other at their bases (as shown in the picture), and hold them together (or put something heavy on top of them) for 5 minutes. Do the same with the base of the side plate to one of the ends, and wait another 5 minutes. Finally, glue the dinner plate to the remaining bowl and leave it to dry before decorating as desired.

Top Tip: The warmer it is, the faster the epoxy will dry; and the colder it is, the longer it will take, so do it in the warmest time of day.

The post Little Indoor Garden appeared first on Alcolin.

Honestly, this build is so straight forward and so fast that you’ll just about have it finished before you’re done paying for it at the store. We suggest finding and purchasing the bottles first (since that will be the toughest part), then sense check the measurements to ensure the height is correct and openings are the correct size before purchasing the rest of the materials. (Tip: if you want this to be even faster, swap out our Cold Glue for our Fast Set wood glue; it also dries clear so won’t be noticeable with the light colour of pine.)

Once you have everything ready, drill, glue and screw, and finally finish off by sanding to a smooth finish. You may also want to seal it with a waterproof seal so that it doesn’t spoil from the dirty flower water, and then put it on display for all to see!

The post Flower Display Stand appeared first on Alcolin.