Wall & Floor Adhesive & Tiling Products | Alcolin

Tile Grout

admin — Mon, 11 Apr 2022 05:00:13 +0000

ALCOLIN GROUT is a cement-based product available in a variety of colours designed to point tile joints on walls and floors up to a maximum width of 10mm for both interior and exterior applications. ALCOLIN GROUT contains additives which improve water resistance, and workability. It has been specially formulated to provide low shrinkage characteristics over a wide joint width range and yet is still able to maintain a smooth finish to the grout surface.

Available in a wide variety of colours.

Size & Colour

1kg: White | Light Grey | Dove Grey
5kg: White | Light Grey | Dove Grey
20kg: Dove Grey

Uses / Applications

Suitable for use on wall and floors
Low shrinkage – suitable for wide grouting up to 10mm
Good water resistance
Excellent workability
Contains no hard fillers which scratch tile surfaces
For interior and exterior use
Available in a variety of colours
Point tile joints on walls and floors

Other Information

Not suitable for wall joint widths less than 2mm and floor joint widths less than 3mm
Not suitable for joint widths wider than 10mm
Do not grout over movement and expansion joints

The post Tile Grout appeared first on Alcolin.

Sugar Soap

admin — Mon, 11 Apr 2022 05:00:12 +0000

ALCOLIN SUGAR SOAP is a strong anionic detergent cleaner for cleaning of previously painted surfaces.

Size

500g boxes

Uses / Applications

Non abrasive
Biodegradable
Solvent free
Non flammable
Grime and dirt remains on the sponge/rag/mop
Remove ingrained grime and dirt from painted and various other surfaces
Imparts a clean surface on which to paint
Suitable for removing oil from floor surfaces
Cleans washbasins, baths, and toilet
Can be used to clean inside and outside drains

Other Information

Not suitable for removing adhesive, paint or varnish
Not suitable as a rust remover

The post Sugar Soap appeared first on Alcolin.

Skim ‘n Prime

admin — Wed, 06 Apr 2022 23:24:27 +0000

ALCOLIN SKIM & PRIME is a ready to use polymer based product for skimming uneven surfaces, filling hairline cracks and general touch up applications typically required of most surfaces prior to painting. The product contains special additives which improves cohesive strength and promotes adhesion to ceiling boards, plaster, lime, cement and wood. Suitable for both interior and exterior applications on both new and old surfaces.

Size

15kg

Uses / Applications

Good water resistance – suitable for interior & exterior applications
Good anti-slump / non-sag properties – easily applied to vertical surfaces
Excellent workability – easy to spread and smooth
Off White finish – less tendency to show through after painting
Good sanding and painting properties – easy to achieve desired finish
Ready to use – no water required for mixing
Quick drying (depending on temperature) – can be sanded and painted over within 6-9 hours

Other Information

Not suitable for repairing of structural faults (foundation movements).
Not suitable for repairing of deep cracks.
Not suitable for use over movement joints.

The post Skim ‘n Prime appeared first on Alcolin.

Protective Top Coat

admin — Wed, 06 Apr 2022 23:12:00 +0000

Alcolin Protective Top Coat is a UV resistant, non-yellowing, self-crosslinking single component water based acrylic coating that cures to a hard wearing, abrasion resistant and chemical resistant gloss finish that is easy to clean, making it ideal for sealing of cementitious and water based epoxy floors in interior and exterior applications in high traffic areas such as warehouses, factory and residential garage floors. Alcolin Protective Top Coat can be used in conjunction with Alcolin Epoxy Floor Paint as it provides an additional transparent protective coating. It also provides an excellent final wearing surface for cement-based screeds and self levelling screeds.

Size

5 litre

Uses / Applications

Pure acrylic – UV resistant and non-yellowing.
High alkaline resistance – Suitable for application onto cementitious surfaces.
Single component – self crosslinking, easy to apply.
Abrasion resistant – improves floor durability.
Gloss finish – improves floor aesthetics and washability
Hard wearing – reduced black heel marks and hot tire pick up resistance.

Other Information

Not suitable for use over dimensionally unstable flooring i.e. vinyl and wood flooring.
Not suitable for use in areas subject to rising damp.
Not suitable as a coat for solvent based and solvent free epoxy systems.
Do not apply in temperatures below 5°C or above 35°C.

Application data

Touch Dry:
Approx. 1 – 2 hours (25°C and 50% humidity)

Full Cure:
24 hours

Overcoat time:
Approx. 1 – 2 hours (touch dry)

Coverage/5L:
Approx. 30m² depending on the nature of the surface. Porous surfaces will have a lower mileage on first coat application.

Recommended number of coats:
2

The post Protective Top Coat appeared first on Alcolin.

Epoxy Floor Paint

admin — Wed, 06 Apr 2022 23:04:27 +0000

Alcolin Epoxy Floor Paint is a durable coating designed to improve and protect interior concrete floors. Ideal for customers looking for garage floor paint, concrete floor paint, or a reliable finish for commercial and residential floors, it helps create a cleaner, neater and more hard-wearing surface. Whether upgrading a home garage, workshop or business floor, Alcolin Epoxy Floor Paint offers trusted performance with a professional finish.

Ideal For

Garage floors
Residential concrete floors
Workshops
Warehouses
Storerooms
Utility rooms
Light commercial interiors
Factory maintenance areas

Why Choose Alcolin Epoxy Floor Paint

Helps improve the appearance of worn concrete floors
Easier to clean than untreated concrete
Durable finish for everyday use
Suitable for home and business environments
Trusted Alcolin quality
Ideal for interior floor upgrades

Garage Floor Paint for Home Use

If you need reliable floor paint for garages, Alcolin Epoxy Floor Paint is ideal for improving the look of bare concrete while helping protect the surface from daily wear and foot traffic. A great option for garages, hobby rooms, storage spaces and home workshops.

Warehouse Floor Coating for Business Use

For businesses needing a practical warehouse floor coating, this product helps create a cleaner and more professional floor surface that is easier to maintain in active working environments. Suitable for warehouses, storerooms, work areas and light industrial interiors.

Surface Preparation

For best results, concrete floors should be clean, solid and properly prepared before applying epoxy floor paint. Direct application over an existing epoxy coating or old paint is not recommended. Previously painted surfaces should be mechanically abraded and all existing paint removed, with the floor prepared back to a clean, solid bare concrete surface before application. Proper floor preparation is essential for strong adhesion, a durable finish and long-term performance. For full surface preparation and application guidance, please refer to the Technical Data Sheet.

Coverage & Usage Calculator

Coverage per 5L unit: Approx. 30m² per coat
Recommended coats: 2 coats depending on surface condition and porosity

Coverage Formula

Floor Area (m²) × Number of Coats ÷ 30 = Units Required

Coverage Examples

Single Garage (18m²): 2 units
Double Garage (36m²): 3 units
Large Garage (50m²): 4 units

Colours Available:

Light Grey / Off White / Beige

Colour Consistency Tip

For larger areas requiring more than one unit, we recommend checking pack labels and using products from the same batch where possible to help maintain colour consistency across the finished floor.

Pack Size

1 x 2.5L Activator
1 x 2.5L Base Pack
Total mixed volume: 5L

Need Full Technical Information?

For detailed preparation instructions, drying times, limitations, application guidance and technical specifications, please download the Technical Data Sheet (TDS).

The post Epoxy Floor Paint appeared first on Alcolin.

Wallpaper Paste

admin — Wed, 06 Apr 2022 22:53:15 +0000

ALCOLIN HEAVY DUTY WALLPAPER PASTE is a starch-based powder that mixes easily with water to form a smooth gel-like paste, used for hanging up heavy duty wallpaper.

Size

200g

Uses / Applications

Easy to mix
Enhanced slip – easy to reposition
Extended open time – sufficient working time
Non-toxic
Designed for hanging heavy duty, normal backed vinyl and other special wallpapers.
Ideal for putting up public posters and adverts on cardboard
Ideal for wallpaper borders
Suitable for paper mache
Mix with food dye to make a safe finger paint
Bonds to primed absorbent surfaces i.e. cardboard
Use on enamel and waterbased acrylic painted surfaces

Other Information

Not suitable for direct application over oil/alkyd/enamel primers or paints
Do not apply wallpaper onto damp walls as this encourages mould growth and decreases adhesion of the paper

The post Wallpaper Paste appeared first on Alcolin.

Ready Mixed Mortar

admin — Wed, 06 Apr 2022 22:49:18 +0000

ALCOLIN READY MIXED MORTAR is a mixture of sand, cement and additives to provide the DIY enthusiast with an easy-to-use mortar.

Size

20kg bags

Uses / Applications

Ideal for small jobs
Suitable for interior and exterior use
Contains rapid-hardening cement
General concrete repairs
Plastering
Bricklaying
Stone-laying
Pathways

Other Information

Not suitable for repairing structural faults i.e. foundation movements

The post Ready Mixed Mortar appeared first on Alcolin.

Contractors Floor Screed

admin — Wed, 06 Apr 2022 22:40:35 +0000

ALCOLIN CONTRACTORS FLOOR SCREED is a grey, cement-based and protein-free self-leveling screed which can be used as a single component system with water or as a twin pack system using a liquid additive such as ALCOLIN LATEX BOND for enhanced adhesion, flexural strength and water resistance. It is designed to provide excellent flow properties, self-smoothing characteristics, rapid walk on times and good adhesion to a variety of substrates. It is ideal for use when an economical screed is required as a flat foundation for tiling onto afterwards.

Size

22kg bag

Uses / Applications

Low shrinkage, reducing risk of developing hairline cracks.
High compressive strength.
Protein free, resisting microbial attack. Ideal for use in hospitals.
Excellent self-levelling properties making it easy to achieve desired level finish.
Prepare, repair and level uneven, internal floors prior to floor-covering installations e.g. laying of carpets, vinyl or tiles, etc.
Suitable for application to concrete and sand or cement screeds.
Can be applied to substrates such as anhydrite gypsum screeds, terrazzo, bitumous waterproof membranes, stone tiles, and well bonded quarry and ceramic tiles if using a priming system such as Alcolin Permo-Key Slurry Kit.

Other Information

Not suitable as a final wearing surface, unless covered with ALCOLIN PROTECTIVE TOP COAT.
Not recommended for use as a decorative finish, unless covered with ALCOLIN PROTECTIVE TOP COAT.
For internal use only. Protect freshly laid surfaces from draughts, direct sunlight and sources of heat.
Not suitable for areas subject to rising damp or in permanently wet conditions.
Do not screed over existing structural or movement joints.

The post Contractors Floor Screed appeared first on Alcolin.

Z100 Floor Screed

admin — Wed, 06 Apr 2022 22:36:20 +0000

ALCOLIN Z100 FLOOR SCREED is a cement based, protein free self leveling screed which can be used as a single component system with water or as a twin pack system using a liquid additive such as ALCOLIN LATEX-BOND for enhanced adhesion, flexural strength and water resistance.
ALCOLIN Z100 FLOOR SCREED is designed to provide excellent flow properties, self smoothing characteristics, rapid walk on times and good adhesion to a variety of substrates.

Size

20kg bags

Uses / Applications

Excellent self levelling properties
Rapid walk on time
Good adhesion to a variety of substrates
Protein free
Prepare,repair and level uneven, internal floors prior to floor-covering installations
Apply to concrete, sand/cement screeds

Other Information

Not suitable as a final wearing surface
For internal use only
Protect freshly laid surfaces from draughts, direct sunlight and sources of heat
Do not screed over existing structural movement joints

The post Z100 Floor Screed appeared first on Alcolin.

P300 Grey Tile Adhesive

admin — Wed, 06 Apr 2022 22:30:07 +0000

ALCOLIN P300 GREY CERAMIC TILE ADHESIVE is a high quality, grey, cement-based ceramic tile adhesive specially formulated for interior/exterior wall and floor applications ALCOLIN P300 GREY CERAMIC TILE ADHESIVE is used for the fixing of mosaic, ceramic, stone, brick, and clay tiles to cement render, screeds, concrete and primed fibre-cement surfaces.

Size

20kg bags

Uses / Applications

Good anti-slump properties
Good wet tack
Good workability
Interior and exterior applications

Other Information

Not suitable for butt joining tiles
Do not tile over existing structural movement joints
Not suitable for porcelain or vitrified tiles
Not suitable for bonding porous light coloured natural stone,may cause discolouration

The post P300 Grey Tile Adhesive appeared first on Alcolin.